CR003 LF EM4200 EM4100 TK4100 4100D UART WG26/WG34 muverengi module 3v kana 5V
Basic Information
25khz LF RFID Reader Module EM4200 EM4100 TK4100 UART / Weigand Modhi
CR003 ndeye 125K yekuverenga chete module yeEM4200 EM4100 TK4100 UART kana Weigand Mode chii chine 3v kana 5v vhezheni uye paDIP28 saizi.
Kushanda uye Kwemuviri Hunhu
| Zita | CR003 akatevedzana Proximity Reader Module | |||
| Kurema | 12g | |||
| Dimensions | 40mm(L) x20mm(H)x8mm(W) | |||
| Tembiricha | -40一s+85C | |||
| Interface | COMS UART kana WG | |||
| Verenga Range | kusvika 8-12 cm | |||
| Frequency | 125KHZ | |||
| Inokodzera | uEM 4001 kana inoenderana | |||
| EM4200,EM4100,TK4100,HT4168,4100D | ||||
| Simba Rinodiwa | DC3.0- 5.5V ,30ma - 50ma | |||
| MCU | 51-8bit CPU | |||
Tsanangudzo yePini & Output Data Formats
| PinNo. | Tsanangudzo | CR003T (ASCII) | CR003W(Wiegand) | CR003M | CR003A(ABAⅡ) |
| Pini 1 | D1 | TTL Data Output(Tx) | DATA1 Output | Data OutputManchester Code | DATA Output |
| Pin 2 | D0 | NC | DATA0 Output | NC | CLK |
| Pin 3 | CS | NC | NC | NC | CP |
| Pin 4 | GND | GND | |||
| Pin 5 | VCC | SIMBA(+4.6V - +5.4V DC) | |||
| Pini 15 | ANT1 | KuAntenna (L1=1000uH) | |||
| Pini 16 | ANT2 | Ku Antenna | |||
| Pini 26 | GND | GND | |||
| Pini 27 | VCC | SIMBA(+4.6V - +5.4VDC) | |||
| Pini 28 | BEEP/LED | BEEPER/LED | BEEPER/LED | NC | BEEPER/LED |
* Pin28 ndeye PEEPER / LED Mutyairi, mushure meKubuda kweData, Pin28 yakaiswa pasi
CR003W01 = Wiegand26
CR003W02 = Wiegand26/34 Chinja
CR003W03 = Wiegand34
Data Formats
CR003T-01Output Data Structure- ASCII(RS232.TTL) 9600bps,N,8,1
| STX (02H) | DATA(10 ASCII) | LRC (2 ASCII) | CR | LF |
| ETX (03H) |
[Iyo 1byte (2 ASCII charaters), LCR ndiyo Longitudinal Redundancy Check.]
Semuyenzaniso:DATA : 62H E3H 08H 6CH EDH,LRC: (62H) XOR (E3H) XOR (08H) XOR (6CH) XOR (EDH)=08H,Zvakabuda: 0X02 0X36 0X32 0X45 0X33 0X30X3000 4 0X30 4 X30 4 X 30 4 4 X 30 X 4 X30 0X38 0X0D 0X0A 0X03
CR003T-02Output Data Structure- ASCII(RS232.TTL) 9600bps,N,8,1
| STX (02H) | DATA(10 ASCII) | LRC (1BYTEI) | ETX (03H) |
[Iyo 1byte (2 ASCII charaters), LCR ndiyo Longitudinal Redundancy Check.]
Semuyenzaniso:DATA : 62H E3H 08H 6CH EDH,LRC: (62H) XOR (E3H) XOR (08H) XOR (6CH) XOR (EDH)=08H,Zvakabuda: 0X02 0X36 0X32 0X45 0X33 0X30X3000 4 0X30 4 X30 4 X 30 4 4 X 30 X 4 X08 0X03
CR003T-03Output Data Structure- ASCII(RS232.TTL) 9600bps,N,8,1
| DATA(10 ASCII) | CR |
[Iyo 1byte (2 ASCII charaters), LCR ndiyo Longitudinal Redundancy Check.]
Semuyenzaniso:DATA : 62H E3H 08H 6CH EDH,
Kubuda: 0X36 0X32 0X45 0X33 0X30 0X38 0X36 0X43 0X45 0X44 0X0D
CR003WOutput Data Structure, Somuenzaniso: Wiegand 26 bit
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 |
| P(1) | E | E | E | E | E | E | E | E | E | E | E | E | O | O | O | O | O | O | O | O | O | O | O | O | P(2) |
| EVEN Parity(E) | ODD Parity(O) | ||||||||||||||||||||||||
P (1):Parity Start Bit, 2-13 bit EVEN Parity bit
P (2):Parity Stop Bit, 14-26 bit ODD Parity bit
Weigand
Data format:
Circuit Diagram yeCR003 Module
